Program 80 - Function Key Descriptor - Sam4s ER-285M Operator's Manual

Program 80 - Function Key Descriptor

By default, descriptors are programmed by entering three-digit alpha codes. If you
wish to program descriptors by typing descriptors on the alpha keyboard overlay you
must select 'Yes' in system option #32 (See "System Option Programming" on page 138).
#/NS Key Descriptor Program Note
Since two distinct functions, # entry and no sale, reside on the same key, different programs are
used to program each descriptor.
•
•
148 • Program Mode Reference Guide
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0, press the SUBTOTAL key.
SUB
8 0
TOTAL
3. If you are programming alpha overlay
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
4. To program additional function keys, repeat from step 3, or press the CASH
key to finalize the program.
CASH
To program the no sale descriptor use program 80 (Enter 80, press SUBTOTAL)
To program the # key descriptor, use program 81 (enter 81, press SUBTOTAL)
FUNCTION
X/TIME
KEY
FUNCTION
KEY
SAM4s ER-285M Operator's and Program Manual v1.4