Check Change Limit Programming - Sam4s ER-285M Operator's Manual

Check Change Limit Programming

Use this program to set the maximum amount of cash that can be returned when a check is
tendered for an amount greater than the amount of the sale. For example, if the check change
limit is $10.00 the maximum amount that can be tendered into the check key on a $5.00 sale
is $15.00.
Programming the Check Change Limit
192 • Program Mode Reference Guide
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 2 0 0, press the SUBTOTAL key.
1 2 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
SUB
0
TOTAL
X/TIME
SAM4s ER-285M Operator's and Program Manual v1.4