Machine Number Programming - Sam4s ER-285M Operator's Manual

Machine Number Programming

The machine number is printed on the register receipt. Program a machine number so that any
receipt can be identified with the store or register where the transaction took place.
Programming the Machine Number
SAM4s ER-285M Operator's and Program Manual v1.4
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 6 0 0, press the SUBTOTAL key.
1 6 0
1. Enter a machine number (up to 5 digits); press the X/TIME key.
4. Press the CASH key to finalize the program.
CASH
SUB
0
TOTAL
X/TIME
Program Mode Reference Guide • 195