Memory Allocation - Sam4s ER-285M Operator's Manual

Memory Allocation

The amount of memory in the ER-285M is fixed and has a default allocation, i.e. you can use
2000 PLUs, 15 clerks, 20 groups, etc. A significant amount of standard memory is not
allocated, therefore you can easily add to the default quantities of many memory items.
This program allows you to change the default allocation in each of nine areas. The default,
minimum and maximum for each memory area is shown on the table below:
MEMORY ITEM
PLU
CLERKS
GROUP
GUEST CHECKS
SOFT CHECK
CHECK TYPE
PRICE LEVEL
MIX AND MATCH
ELECTRONIC JOURNAL
NOTE: Memory allocation should be programmed before the register is programmed
and placed into service. If memory allocation is changed, the current program and
totals will be lost.
110 • Service Mode Reference Guide
Default Minimum
2000 50
15 1
20 1
15 1
30 lines 1 line
Std: Soft Check
1 1
10 tables 0 tables
3000 lines 0 lines
SAM4s ER-285M Operator's and Program Manual v1.4
Maximum
10,000
99
99
500
50 lines
Option: Hard
Check
2
99 tables
24,000 lines