Program 801 - Drawer Assignment & Training Clerk - Sam4s ER-285M Operator's Manual

Program 801 - Drawer Assignment & Training Clerk
Address
176 • Program Mode Reference Guide
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0 1, press the SUBTOTAL key.
8 0 1
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SUBTOTAL key.
OPTION
Drawer assignment:
N1
(0: default drawer, 1: no drawer)
Training Mode Clerk
N2
N1 N2 SBTL
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to
finalize the program.
CASH
SUB
TOTAL
SAM4s ER-285M Operator's and Program Manual v1.4
VALUE = SUM
0-1
Yes = 1
No = 0