Program 70 - Function Key Options - General Instructions - Sam4s ER-285M Operator's Manual

Program 70 - Function Key Options – General Instructions
Use Program 70 to set options for function keys. Because of the differences inherent in
function keys, individual options will be different. See the specific instructions for each key
that follow the general instructions.
150 • Program Mode Reference Guide
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 0, press the SUBTOTAL key.
SUB
7 0
TOTAL
3. Enter the values for the option digit or digits. Depending on the function key
you are programming, you may enter up to six digits N1 through N6.
Determine the values for N1 through N6 by referring to the specific function
key information that follows. (You do not need to enter preceding zeros. For
example, if the function key offers six digits, N1 through N6 and you are only
selecting a value for N6, just enter the value for N6.) Press the function key
you wish to program.
N1 N2 N3
4. To program additional function keys, repeat from step 3, or press the CASH
key to finalize the program.
CASH
FUNCTION
N4 N5 N6
KEY
SAM4s ER-285M Operator's and Program Manual v1.4