Media Compiler Unit Assembly Removal - Lexmark C950 Service Manual

Move the lower pinch guide assembly (A) upward and outward.
4.
5. Remove the lower pinch guide assembly (A).

Media compiler unit assembly removal

Remove the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
3. Remove the rear lower cover. See
Remove the upper media bin assembly. See
4.
Remove the upper media bin vertical cover. See
5.
Remove the stapler unit frame. See
6.
7. Remove the media eject clamp motor assembly. See
Remove the media eject unit assembly. See
8.
Remove the media eject motor assembly. See
9.
Loosen the four screws securing the plate (A) to the finisher.
10.
A
See"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"Stapler unit frame removal" on page
Front
"Upper media bin assembly removal" on page
"Right eject cover removal" on page
"Clamp drive motor removal" on page
"Media eject unit assembly removal" on page
"Media eject motor assembly removal" on page
5058-030
4-273.
4-306.
4-350.
4-349.
4-307.
4-339.
4-265.
4-296.
4-295.
Repair information
4-291
Previous
Next
Go Back