Error/Warning Messages; Messaggi Di Avvertenza/Errore; Mensajes De Error/Advertencia; Mensagens De Erro/Aviso - Epson XP-302 Basic Operation Gude

Error/Warning
Messages
Messaggi di
avvertenza/errore
Mensajes de error/
advertencia
Mensagens de erro/
aviso
0
EN
Code
E-01 Turn the printer off and then back on. Make sure that no paper is still in the printer. If the error still appears, contact
Epson support.
E-02 Turn the printer off and then back on. If the error message still appears, contact Epson support.
E-10 Turn off the printer. Contact Epson support to replace ink pads.
W-02 Paper jam. Remove the jammed paper, turn off the printer, and then turn it back on. R & 40
W-03 Paper jam. Open the scanner unit, remove the jammed paper, and then press x. R & 39
W-10 The ink cartridge(s) shown on the LCD panel have not been installed. Install them. R & 36
W-12 Cannot recognize the ink cartridge(s) shown on the LCD panel. Replace the ink cartridge(s). Epson recommends the
use of genuine Epson ink cartridges.
W-13 Press x to resume printing. The message will be displayed until the ink pad is replaced. Contact Epson support to
replace ink pads before the end of their service life. When the ink pads are saturated, the printer stops and Epson
support is required to continue printing.
I-22 To establish a wireless connection using an access point, press the push button on the access point or click the button
on the access point's wireless settings screen displayed on your computer's screen. R & Online Network Guide
I-23 You need to enter the PIN code displayed on the printer's panel into the access point or computer within two minutes.
If no code is entered during the two minutes, a time-out error occurs and a different code is displayed and needs to be
entered.
I-31 To make wireless connection settings from your computer, you need to insert the CD into the computer and follow
the on-screen instructions.
I-60 Your computer may not support WSD (Web Services for Devices). The scan to PC (WSD) function is only available for
computers running English versions of Windows 7 or Vista.
Recovery The firmware update has failed. You will need to re-attempt the firmware update. Ready a USB cable and visit your
Mode local Epson website for further instructions.
Solution