Numeric Entering Of The Reference Weight - KERN FES 33K0.1 IPM Operating Instruction

From now, the added weight
is shown in %.
By repeated pressing, switching option of
the displayed value in „g" or %"
NOTE:
• If the error message "o-Err " is displayed, the reference weight is outside the
weighing range
• The 100% reference is preserved until the balance is disconnected from the
mains.
10.3.2

Numeric entering of the reference weight

Operation
Activate function [q SET 3]
(see chap. 7).
The display shows the %-symbol.
Determine reference weight:
Press for about 4 seconds, until
[P. SET] is displayed, then
release
FES/FEJ-BA-e-1132
7y0
59t8
7y0
Display
q SET 3
z0
The display shows flashing the last
saved reference weight
%
g
%
%
49