Copying Selected Parameters From A Memory; Programming A Blackout Cue - Compulite Spark User Manual

Copying selected parameters from a memory

Example: Copy the gobo parameter from spot 10 in memory 1 to spot 4.
Keypresses
1. Select spot 4
2. Press the SK for gobo.
3. Press [COPY]
4. Select memory 1
5. Press 10 on the numeric
keypad to select spot 10.
6. Press [ENTER]

Programming a Blackout Cue

Blackout cues are created by recording a memory when the editor is empty. This can be
done in live or blind mode.
In the Memory List in the text column, blackout cues are automatically given the texzt
'Blackout'.
When you examine blackout memories the message This Memory is a Blackout' is
displayed.
Example: Record memory 8.5 as a blackout.
Keypresses
1. Press [RESET]
2. Press [=] [ 8] [•] [5]
3. Press [STORE]
Programming a Blackout Cue
Results/Comments
The selected parameter is displayed in red.
Copy from is written in the command line.
The selected parameter values are copied
from spot 10 in the selected memory to spot
4.
Results/Comments
All spots and channels are cleared from
the editor and the editor is in idle mode.
7-9
Spark