Modifying Time Assignments; Using Parts As Editor Groups; Assigning Parts To Controllers; Playing Back Parts - Compulite Spark User Manual

15-8

Using Parts as Editor Groups

Modifying time assignments

Example: Change the time assignment for part 5 in memory 1. This modification does not
turn on the spots/channels in the selected part.
Keypresses
1. Select memory 1.
2. Select Part 5
3. Press [TIME] or [WAIT] The current time assignment is displayed.
4. Enter the new time
assignment
5. Press [STORE]
Using Parts as Editor Groups
Parts may be converted to editor groups by selecting a part assignment.
Example: Select the channels that are assigned to part 6 in memory 8.
Keypresses
1. Select memory 8.
2. Select Part 6.
3. Press [ENTER]

Assigning Parts to Controllers

A part can be assigned to faders and controllers as a group.
Example: Assign part 3 from memory 2 to a fader or a controller
Keypresses
1. Select memory 2.
2. Select part 3.
3. Press [ASSIGN]
4. Press an SK.

Playing Back Parts

Only the A/B crossfader supports playback for Parts.
When [GO] is pressed all of the Parts start fading at the same time. If a part has a wait
time the Wait time begins counting when [GO] is pressed.
The XFade Exam displays the fade progression of an incoming Part Q.
Spark
Results/Comments
The message Memory 1 Stored is displayed.
Results/Comments
The channels and spots in part 6 are an editor
group.
Results/Comments
The prompt Assign Key Expected is displayed.
The channels and spots from part 3 are assigned.