Operating Macros Using The Numeric Keypad - Compulite Spark User Manual

18-10 Operating Macros
Operate Macros 21 - 40
Keypresses
1. Press [MACRO]
2. Press and hold [SHIFT]
3. Press an SK to operate a Macro
To operate Macro 26 press [SK
6], Macro 32 [SK 12], etc.

Operating Macros using the numeric keypad

When you select a Macro for operation, it is isolated in a window in the middle of the
screen and the command line displays Press F6 for start Macro! in red. The Macro
window closes automatically after 10 seconds. As long as the message is displayed in the
command line you can press [F6] to operate the Macro. If you press any other key the
Macro operation is aborted.
Keypresses
1. Press [F6]
2. Enter the Macro number on the
numeric keypad.
3. Press [F6]
Spark
Results/Comments
Pressing this key displays the Macros.
You can skip this step if the SK default
mode is Macro unless you want to view
the Macro List.
When SHIFT is pressed the display
shows 21 – 40 under the Mode on the
controller display.
Results/Comments
The Macro list is displayed. Page this
list using [PAGE UP] and [PAGE DN].
The Macro is displayed in a window for
10 seconds. The command line reads
Press F6 for start Macro!
The Macro is triggered.