Using Memory Range Modification; Modifying A Channel Over A Range Of Memories; Adding A New Channel To A Range Of Memories - Compulite Spark User Manual

9-12

Using Memory Range Modification

Using Memory Range Modification
Use this function to modify channel intensity and scroller assignments over a range of
memories or in a group of memories.
The examples below modify single channels, however a range of channels may also be
selected.
You may want to display the Selected Channel exam (see Chapter 4 Selecting and Editing
Channels and Scrollers) when working with this function.
¾ ¾
Note
This function cannot be used with spots.

Modifying a channel over a range of memories

Keypresses
1. Select a range or a group of
memories.
2. Select the channel/s for modification.
3. Modify intensity using the dimmer
wheel for proportional modification or
[@] for absolute modification.
4. Press [STORE]

Adding a new channel to a range of memories

Keypresses
1. Select a range of memories.
2. Press [+]
3. Select the channel number and
assign intensity using the wheel or
the keypad.
4. Press [STORE]
Spark
Results/Comments
If there are a lot of memories to store, a
Wait message may be displayed. When
Æ
the modification is complete, the
message Memory #
displayed.
Results/Comments
New appears in the command line.
A range of channels may be selected.
If there are a lot of memories to store, a
Wait message may be displayed. When
the modification is complete, the Æ
message Memory #
displayed.
# Stored is
# Stored is