Programming And Burning Patch 999 - Compulite Spark User Manual

Programming and burning Patch 999

Keypresses
1. Enter Service Tools
2. Press [MENU] More
functions
3. Press F3 999
OPER
4. Insert formatted
diskette to disk drive
5. Press F2 999
RECORD
6. Edit the file using the
text editor on your PC.
7. Insert the disk into the
disk drive on the
lighting console.
8. Go to Disk Operation
9. Press F2
LOAD IMAGE
10. Press F1
LOAD FILES
11. Press F6
PROGRAM
FLASH
Results/Comments
The second page of options is displayed.
Access patch 999. The patch display consists of 8
columns. Each column is further divided into 2
labeled chan and DMX . The chan/DMX numbers go
from 1 to 999 in ascending order. Numbers that are
higher than the number of dimmers in the system
configuration appear in dark gray and DMX 0 is
assigned as a default.
Editing this patch table is done on a PC, therefore the
file must first be copied onto a diskette.
Patch 999 is copied to the diskette. The file name is
recorded as the image file name and the suffix 999.
Example: the image file is SPA05R01. The name of
the recorded Patch 999 file will be SPD05R01.999.
(see instructions table below)
Now the edited Patch 999 can be written to the Flash
RAM.
If more than one file exists on the disk, select the one
you want to load.
The system automatically records the old Patch 999,
as a rescue file.
The new Patch 999 is written to the Flash RAM.
When completed, return to the main of Service Tools
and press F1 to Cold Start the system.
Patch 999 B-3
Spark