Adding Text To Snaps; Examining Snaps; Viewing The Snap List; Examining A Selected Snap - Compulite Spark User Manual

Adding Text to Snaps

Text labels can be attached to snaps.
Keypresses
1. Press [SNAP]
2. Enter the Snap number on
the numeric keypad.
3. Press [TEXT]
4. Type the text on the
alphanumeric keypad.
5. Press [STORE]

Examining Snaps

There are 2 Snap Exams. The Snap List is a list of all the Snaps with their text labels.
Selected Snap Exams show all the playback device assignments stored in the Snap and
their run modes.

Viewing the snap list

Keypresses
1. Press [SNAP]
2. Press [EXAM]

Examining a selected Snap

Keypresses
1. Press [SNAP]
2. Select the snap on the
numeric keypad
3. Press [EXAM]
4. Press [+] or [-] to exam
the next or previous Snap.
Adding Text to Snaps
Results/Comments
Snap is displayed in the command line.
Text for Snaps is displayed in all Snap exams.
The first 5 characters are displayed on the
Controller display in Soft Key Snap mode
Results/Comments
Snap is displayed in the command line.
A list of the snaps and any textual notes is
displayed. This is a strong Exam display.
Results/Comments
Snap is displayed in the command line.
All information for the selected snap is displayed.
17-3
Spark