Selecting A Single Spot; Selecting Multiple Spots; Recalling The Last Spot Selection - Compulite Spark User Manual

Selecting a single spot

Keypresses
1. Press [SPOT]
2. Enter the desired spot
number on the keypad.
To continue spot selection, [+] and [] may be used to increment or decrement the active
spot number.
When a new spot is selected, the previous selection is now displayed in white to indicate
its presence in the editor. The newly selected, currently active spot number appears in red
and all of its parameters may be addressed.

Selecting multiple spots

There are several series of keystrokes to select one or more than one spot at a time. These
keystrokes may be combined in any way lending great versatility to spot selection.
[SPOT] [#] Select a single spot.
[SPOT #] [SPOT #] [SPOT #]... Select non-sequential spots.
[SPOT] [# → #] Select a range of spots.
Any permutations of spot selection may be used.
Æ Æ
For example: [1 3] [SPOT 8] [SPOT 10] [SPOT 22
spot selection very flexible.

Recalling the last spot selection

For editing speed Spark offers a sequence that reselects the last group of spots that were
active in the editor.
Keypresses Results/Comments
1. Press [SPOT]
Spots that were selected previous to the last press on
2. Press [•]
[RESET] are selected and appear in red. They can now be
edited as usual.
Selecting Spots
Results/Comments
Skip this step if the default number selection
is Spot.
The parameter names of the selected spot/s
are displayed and they also appear on SK
controller display if [PARAM] is enabled.
Æ Æ
24]. These possibilities make
6-5
Spark