Assigning Controllers As Submasters; Assigning Controllers As Inhibit Submasters; Submastering Playback Devices - Compulite Spark User Manual

Returning to memory rate
Keypresses
1. Press [RATE CHASE]
2. Press the [SK]
3. Turn the Rate wheel until the
display shows MEM.
4. Press [RATE CHASE] to exit
the function.

Assigning Controllers as Submasters

The Submaster option operates in Assign mode. It provides inhibit submasters for
memories, channels, and spots. Controllers can also be assigned to submaster the upper
bank of controllers, the lower bank of controllers, the A/B crossfader, and DMX input.

Assigning controllers as inhibit submasters

Controllers may be designated as inhibit submasters, submastering channels or spots.
Memories can also be assigned to an inhibit submaster, however the assignment is
recognized as a group and submasters the channels/spots included in the group. .
Keypresses
1. Select the channels/spots for assignment.
2. Press [SUBM]
3. Press the [S.K.] for submaster assignment. Sub is displayed on a gray field.

Submastering playback devices

Controllers can be assigned to submaster the upper controllers, the lower controllers, the
A/B crossfader and DMX input. [U/L/X] provides the submaster playback devices option.
Access this key using [SHIFT].
Submaster the Upper Bank of controllers
Keypresses
1. Press [U/L/X]
2. Press the [SK] for submaster
assignment.
Assigning Controllers as Submasters
Results/Comments
The LED of the key is lit, indicating that the
rate wheel is now active.
The current chase rate is displayed on a blue
field
The modified rate is displayed in percentage
on a blue field on the Chaser display.
MEM is displayed in blue.
Results/Comments
Results/Comments
Submaster UPPER (1
displayed in the command line.
Æ
Sub 1 10 on a red field is displayed on
the Controller display. Pup is displayed on
the XFade Exam.
12-19
Æ
10) controllers is
Spark