Editing Libraries; Modifying A Library; Adding Spots To A Library - Compulite Spark User Manual

14-6

Editing Libraries

Editing Libraries
Libraries can be modified in the editor or updated during the STORE STORE function.
In the examples below, Gobo library 6 is modified.

Modifying a library

You can modify the parameter values for spots in the library.
Keypresses
1. Press [GOBO]
2. Select 6 on the
numeric keypad.
3. Press [SPOT]
4. Select spots and
modify parameters.
5. Press [STORE ]

Adding spots to a library

Example: Add spots to Gobo library 6.
Keypresses
1. Select spot/s.
2. Assign parameter
values.
3. Press [IN LIB]
4. Press [POSITION]
5. Enter 6 on the numeric.
6. Press [STORE]
Or
Keypresses
1. Press [POSITION]
2. Enter the library
number on the keypad.
3. Press [SPOT]
4. Select new spot/s.
5. Assign parameter
values.
6. Press [STORE]
Spark
Results/Comments
All the spots in the library are displayed in the editor.
The message Library G- 06 Stored is displayed.
Results/Comments
The library number is displayed in the command
line.
The message Library P – 06 Stored is displayed.
Results/Comments
All the spots in the library are displayed in the editor.
The message Library P – # Stored is displayed.