Selecting Display Formats; Customizing The Display Format - Compulite Spark User Manual

6. X-fade Exam shows the incoming and outgoing memories, a list of the next memories
in sequence, controller/chaser status, chaser assignments, A/B fade rate, and previous
memory on A/B.
7. X-fade and playback.
8. X-fade and spots.
In addition to the 9 main display options, the `Status Window' section of display formats
offers further display configurations.

Selecting display formats

When the system is configured for spots and channels, there are up to 9 display options.
When the system is not configured for spots there are 4 display options available. The
display option framed in red is the current display.
Keypresses
1. Press [STAGE]
2. Enter the number of the display
you want on the numeric keypad.
or
Keypresses
1. Press [STAGE]
2. Press F1 until the display format
that you want is framed in red.
3. Press [STAGE]

Customizing the display format

There are 6 additional options for customizing the display formats. The options appear in
the Status Window to the right of the display options.
Keypresses
1. Press [STAGE]
2. Press F2 to move the
cursor to your selection.
3. Press F3
Results/Comments
The display format options are shown on the
CRT.
The display jumps to the selected format.
Results/Comments
The display format options are shown on the
monitor.
The display jumps to the selected format.
Results/Comments
The cursor points to the options.
The option is selected, highlighted in the Status
Window. The display format options are updated with
the selected status.
Display Formats
Spark
3-3