Removing Channels/Spots From A Part; Removing Part Assignments - Compulite Spark User Manual

Removing channels/spots from a Part

When a channel or spot is removed from a part it is automatically reassigned to Part 0.
Channels and spots can also be reassigned to any Part.
Example: Remove spot 5 from its part assignment in memory 1.
Keypresses
1. Select memory 1.
2. Select spot 5.
3. Press [PART].
4. Press [ERASE]

Removing Part assignments

Removing a Part automatically assigns the channels and spots in the part to part 0.
Example: Remove Part 3.
Keypresses
1. Select memory 1.
2. Press [PART] and enter 3 on
the keypad.
3. Press [ERASE]
Example: Remove all Part assignments.
Keypresses
1. Select memory 1.
2. Press [PART]
3. Press [ERASE]
Modifying a Part
Results/Comments
The memory is now live on-stage.
The message Memory 1 Stored is displayed.
Results/Comments
The message Memory 1 Stored is displayed.
Results/Comments
The message Memory 1 Stored is
displayed.
15-7
Spark