7-8
Using the Copy Function
Copying all spot parameters from the editor
Example: Copy all the parameter values from spot 10 to spot 4.
Keypresses
1. Select spot 4.
2. Press [COPY]
3. Press 10 on the keypad
4. Press [ENTER]
Copying selected spot parameters from the editor
Example: Copy the gobo parameter values assigned to spot 10 in the editor 1 to spot 4.
Keypresses
1. Select spot 4.
2. Press the SK for gobo.
3. Press [COPY]
4. Press 10 on the numeric
keypad to select spot 10.
5. Press [ENTER]
Copying spot parameters from a memory
Example: Copy all the parameter values from spot 10 in memory 1 to spot 4.
Keypresses
1. Select spot 4.
2. Press [COPY]
3. Select memory 1
4. Press 10 on the numeric
keypad to select spot 10.
5. Press [ENTER]
Spark
Results/Comments
Copy from appears in the command line.
Spot 10's editor values are copied to spot 4.
Results/Comments
To copy more than 1 parameter, press as many
parameter selections as necessary.
Copy from appears in the command line.
The editor values are copied from the selected
parameter/s in spot 10 to spot 4.
Results/Comments
Copy from appears in the command line.
Select the memory containing the spot from
which you want to copy.
The values are copied from spot 10 in the
selected memory to spot 4.