A/B Crossfader - Compulite Spark User Manual

full intensity when spot/channel 1 is at 90%. If you continue moving the wheel until
spot/channel 1 is at full and then you fade both spots/channels down, spot/channel 1 will
begin the fade first. The 10% difference in the spots'/channels' intensities is always
maintained.
The above example uses the dimmer parameter, however the explanation is valid for all
the parameters.
Spark's control panel has three horizontal parameter wheels, numbered Wheel 1, Wheel 2,
and Wheel 3. When editing channels or when the editor is idle, the wheel assignments
are: Wheel 1 - int intensity, Wheel 2 - frm frame, Wheel 3 - rate chaser or A/B rate. For
editing spots the wheels are organized into 9 Wheel Banks. Parameters can be assigned to
more than one wheel.
1 - rt
1 - frm
1 - dim
To move from one parameter wheel bank to the next press [WHEEL+] or [WHEEL].

A/B Crossfader

The A/B crossfader is the playback crossfader of the system.
Memories crossfade, sequencing in numerical order, when either an automatic Go
command is received or the crossfade is performed manually.
Fades are executed automatically (by pressing [GO]), according to prerecorded fade rates,
or by manual movement of the crossfader. The crossfade rate can be overridden at any
point in the fade progression by using the rate wheel.
ZKHHO 
ZKHHO 
ZKHHO 
A/B Crossfader 2-5
Spark