Navigating The Menus - Christie J Series User Manual

Section 3: Operation
Lens H and Lens V
When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys
/R A
EFT IGHT RROW
(L
indicate the type of adjustment taking place. For example,
• Use the F
OCUS
• Use the Z
OOM
• Use the L
ENS
• Use the L
ENS
Press E
XIT
to return to a presentation level.
D A
OWN RROW
Remote Keypad. All 4 lens settings can be adjusted by using the soft keys.
Laser
Press L
ASER
to activate the laser pointer on the remote. Point the remote
at the screen to highlight an area of your presentation.
Leave batteries in the wired remote keypad for the L
NOTE:
work.
3.2

Navigating the Menus

Main Menu
Most of the projector controls are accessed from
within the projector menu system. There are several
groups of related functions, with each group selectable
from the Main menu as shown at right. Press M
any time to display this Main menu.
On the remote keypad, enter the number correspond-
ing to the function menu you wish to access, such as 2
for the Image Settings menu. Or use the U
A K
RROW EY
on any keypad to highlight the desired
option, and press E
menu or list of further options will appear.
With a function menu displayed, enter a menu option number for any numbered option, or use the U
A K to highlight the desired option and then press E
RROW EY
use the arrow keys to access the remainder of the menu. Locked items or items that do not pertain to the current
action or condition appear dimmed and cannot be selected.
When finished with a function menu:
• Press E
XIT
to return to the previous screen.
OR
• Press M
ENU
to leave the menu system and return to the presentation.
3-8
K or U /D
EY P OWN
and the L A or R
EFT RROW
and the L A or R
EFT RROW
H and the L A
EFT RROW
V and the U A or D
P RROW
K
EY
to get the same effect as if using the arrow keys related to "Lens V" or "Lens H" on the
NTER
. The corresponding function
A K
RROW EY
) related to each function. A small window will appear to
A K
IGHT RROW EY
to improve image clarity as desired.
A K
IGHT RROW EY
to achieve a desired image size.
or R A K
IGHT RROW EY
to position the image horizontally.
A K
OWN RROW EY
to position the image vertically.
Use the L
ENS
NOTE:
ASER
1. Size & Position
2.
Image Settings
3.
Channel Setup
4. Configuration
5.
Lamp
6.
Status
ENU
at
7. Input Switching & PIP
8.
Language
9.
Test Pattern
/D
P OWN
NTER
key (built-in keypad) with the general U
CAUTION
key to
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
Main Menu
F 3-4 M
IGURE AIN
. Long menus have a scroll bar on the right—
J Series 1000W and 1200W User Manual
/
P
Wavelength 670nm
Max Output 1mW
CLASS II LASER PRODUCT
English
Off
M
ENU
/D
P OWN
020-100706-02 Rev. 1 (03-2014)