Christie J Series User Manual page 66

Section 3: Operation
TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu, then press E
activate the Select Channel Operation submenu. Select Delete and press E
confirm the deletion of this channel.
Channel Setup
1. 1,2 iSVid
2. 4,1 pDig
TO DELETE MULTIPLE CHANNELS highlight any channel in the Channel Setup menu and press E
to go to the Select Channel Operation submenu. Select Delete Unlocked Only and press E
unlocked channels. Select Delete All Channels to delete all channels, even those that are locked. In either
case, the current channel will remain but will be redefined from projector defaults.
window will appear to confirm the deletion of the desired channel. Select C
delete after all.
CHANNEL EDIT — STEP 1
Press M
ENU
from the presentation level to display the Main menu. To display the Channel Setup menu, press
3 or move the highlight to the Channel Setup option and press E
CHANNEL EDIT — STEP 2
To edit parameters shown in the Channel Setup menu, select the relevant channel and press E
Channel Edit menu will appear similar to the sample shown below.
CHANNEL EDIT — STEP 3
3-16
Enter
15.73kHz- i59.94-Hz-
33.72kHz+ p29.07-Hz+
Select Channel Operation
F
IGURE
Card Type
H-Frequency
V-Frequency
Interlaced
Sync Source
1. Name
2. Channel
3.
Slot
4. Input
5. In Menu
6.
Auto Select
7. Locked
8. Previous Channel
9. Next Channel
F
IGURE
Edit
Copy
Delete
Delete Unlocked Only
Delete All Channels
(default)
3-15 D C
ELETE A HANNEL
NTER
Channel Edit: 01
Video Decoder Input Card
15.73 kHz-
59.94 Hz-
Yes
S-Video
i59.94Hz-
15.73kHz-
1
1
1
3-16 C E
HANNEL DIT
NTER
—a window will appear to
Do you wish to delete this channel setup?
Delete Channel Setup
Cancel
NTER
NOTE: For any deletion, a
ANCEL
(default) if you don't want to
. The Channel Setup menu will appear.
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
NTER
to
NTER
to delete all
NTER
. The