Christie J Series User Manual page 107

4. In each projector, select a "User" color adjustment (1-4) to enable Color Adjustments by X,Y changes. Then
enter your recorded x/y values into each menu.
Color Adjustments by X,Y
1.
Select Color Adjustment
2.
Color Temperature
3. Red X
4. Red Y
5. Green X
6. Green Y
7. Blue X
8. Blue Y
9. White X
10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
13. Color Enable
14. Copy From
5. In each projector, judge by eye and adjust x/y coordinates slightly in the following manner:
• To match reds, decrease "Red X" until full
field red screens match.
• To match greens, decrease "Green Y" until full
field green screens match.
• To match blues, increase both "Blue X" and
"Blue Y" until full field blue screens match.
NOTE: For speed, enable the "Auto Color
Enable" check box. Each color coordinate you
select will then automatically trigger a full
field display of the corresponding color.
Alternatively, use the Color Saturation menu
for these adjustments or to fine tune.
These coordinate adjustments move the three color points closer together (see below) to establish a "shared"
gamut attainable by all projectors in your group. Adjust only as necessary to ensure that the resulting color
palette is as large as possible. When done, you may need to adjust lamp power slightly.
6. All screens should now be color-matched. Apply this new "User" gamut to a source at any time by
selecting it in the "Select Color Adjustment" list accessed in the Advanced Image Settings menu.
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
Color Adjustments by X,Y
User 2 1.
Select Color Adjustment
2.
6521 Color Temperature
0.655 3. Red X
0.341 4. Red Y
0.332 5. Green X
0.575 6. Green Y
0.144 7. Blue X
0.093 8. Blue Y
0.320 9. White X
0.330 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
F 3-41 C X/Y V
IGURE OPY
User 2 1.
Select Color Adjustment
2.
6521 Color Temperature
0.640 3. Red X
0.350 4. Red Y
0.329 5. Green X
0.560 6. Green Y
0.129 7. Blue X
0.100 8. Blue Y
0.374 9. White X
0.367 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
I A P
ALUES NTO LL ROJECTORS
Color Adjustments by X,Y
1. Select Color Adjustment
2. Color Temperature
3. Red X
4.
Red Y
5. Green X
6. Green Y
7. Blue X
8. Blue Y
9. White X
10. White Y
11.
Yellow Notch Filter
12. Auto Color Enable
13. Color Enable
14. Copy From
F 3-42 C
IGURE
Section 3: Operation
Color Adjustments by X,Y
User 2
6521
0.626
0.350
0.331
0.528
0.133
0.106
0.323
0.359
Red
Max Drives
User 2
6521
0.655 Reduce Red X
0.341
0.332
0.575 Reduce Green Y
Increase Blue X
0.144
and Y
0.093
0.320
0.330
Red
Max Drives
A
OLOR DJUSTMENT
3-57