Advanced Tabbed Page - Rte - Christie J Series User Manual

Creating a User Name and Password
1. Click Add User to open the Add User window. See
2. Type your username and password in the User name and Password
fields respectively.
3. Re-type your password in the Re-type Password field.
4. Click Ok to save.
Change Password
1. Select the user whose password you wish to change from the
Users window. See
2. Click Change Password to open the Password Change
window.
3. Type the new password in the Password field.
4. Re-type the password in the Re-type Password field.
5. Click Ok to save or Cancel to ignore.
Delete User
1. Select the user that you wish to remove from the Users window.
See Figure 4-13
2. Click Delete User to open the Delete User window. A
confirmation message appears.
3. Click Yes or No to proceed or ignore the action.

4.3.7 Advanced Tabbed Page - RTE

The RTE secondary tabbed page is where you can manage real-time events (i.e. add, delete, edit, copy and
setup the GPIO) as described in the following section.
RTE Buttons
The real-time event buttons include the following:
• Add, create a new event
• Delete, remove one or multiple existing events
• Delete All, remove all events
• Edit, change or add information for an existing event
• Copy, clone an existing event
• Stop, discontinue the event running
• GPIO Setup, used to configure the GPIO pins as inputs/outputs and to set the current state of the output pins
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03/2014)
Figure 4-12.
.
Section 4: Web User Interface
Figure 4-11.
F
IGURE
F 4-12 P
IGURE
F
IGURE
4-11 A U
DD SER WINDOW
C
ASSWORD HANGE WINDOW
4-13 D U
ELETE SER WINDOW
4-9