Christie J Series User Manual page 69

Resize Presets will display an image in its native
resolution (no resizing) or will resize the image
by maximizing either the height, width or both
height and width, or will resize to the maximum
size possible while keeping the original aspect
ratio.
Size, Position and Blanking parameters will
automatically adjust accordingly or, if Blanking
is set first, which defines an Active Input Area;
Resize Preset scaling will occur in this region of
interest only. Resizing options are explained
below.
WHAT IS THE RESIZING DEFAULT?
By default when displaying a new source, your image will use as much of the projector display area as possible
for the type of incoming source data, but with minimal or no changes to aspect ratio. See Select "Default"
below.
The "Custom" re-size descriptor automatically appears in the Size and Position menu when any of the values
for Size, Vertical Stretch, H-Position, V-Position or Blanking do not correspond to those for a preset. This
option is not offered in the Resize Presets pull-down list.
Select DEFAULT for most sources (factory default). The image will be centered and displayed as large as
possible depending on the type of source.
NO RESIZING - displays the image in its native resolution, which may or may not match the projector
resolution. For example, for a source with a native resolution of 800 x 600, "No Resizing" in an SXGA+
projector will use the central 800 x 600 pixels and have a black border—the black border areas are unused
areas, see below.
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
Resize Presets
1. Default
2. No Resizing
3. Full Size
4. Full Width
5. Full Height
6. Anamorphic
Custom (not selectable)
F 3-19 R D
IGURE ESIZING EFAULT
F 3-20 N R
IGURE O ESIZING
Section 3: Operation
= maximize for current source
= display in native resolution
= fill the screen (regardless of source)
= fill display width & keep aspect ratio
= fill display height & keep aspect ratio
= retain 16:9 aspect ratio
= non-preset values for
Size, Vertical Stretch, H-Position,
V-Position and/or Blanking
F 3-18 R P
IGURE ESIZE RESETS
3-19