Remote Control Of The Projector - Christie J Series User Manual

Section 3: Operation
Using the Color Saturation Menu for Color Matching
To use the Color Saturation menu to
match colors across multiple screens.
In the three Color Adjustment
submenus (Red, Green, Blue, and
White—see right), set all main values
to 1000 and the secondary values to 0,
if applicable. Then judge by eye and
adjust the slide bars as needed.
Adjustments here define new x/y
coordinates in the Color Adjustments
by X,Y menu.
For best results, use this menu after
doing the color adjustment procedure.

3.13 Remote Control of the Projector

As an alternative to using a keypad, most projector functions can be controlled remotely, typically at a
controller such as a PC, via a web interface.
VIA ASCII MESSAGING — Connect a serial link between your controller and the RS-232 or RS-422 port
(recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector
address. Valid ASCII codes and messages are documented in the Christie Serial Communications document
available at the Christie website.
VIA WEB INTERFACE — Connect the PC to the projector Ethernet port. In the web browser (i.e., Internet
Explorer), enter the IP address of the projector you wish to control. This will prompt a login screen. The
default login ids are: admin, service, and guest. Up to a maximum of 3 users can connect at any given time.
Two users can use the same account to log in. Each user will see a different set of tabs. The default passwords
can be edited by an administrator or a service user in the Admin tab. Guest users will not see this tab. Basic
operations of the projector can be controlled from this interface and the Virtual OSD can be accessed from
here.
3-58
Select Color Adjustment
1.
Red Part of Red
2.
Green Part of Red
3.
Blue Part of Red
4.
Green Part of Green
5.
Red Part of Green
6.
Blue Part of Green
7.
NOTE:
Blue Part of Blue
8.
Red Part of Blue
9.
Green Part of Blue
10.
Red Part of White
11.
Green Part of White
12.
Blue Part of White
13
Color Purity Filter
14.
Auto Color Enable
15.
Color Enable
16.
Copy From
17.
Lamp
18..
F 3-43 C
IGURE
Color Saturation
M U C
OLOR ATCHING SING
J Series 1000W and 1200W User Manual
User 2
1000
0
0
1000
0
0
1000
0
0
1000
1000
1000
White
Max Drives
S M
OLOR ATURATION ENU
020-100706-02 Rev. 1 (03-2014)