Christie J Series User Manual page 121

• Click the Test button to test the entered command string.
red icon appears to the right side of the Test button as shown in
10. Click Finish to create the added event.
See Figure 4-17 RTE Listing Window
RTE Listing window, select or clear each check box in the Active column accordingly.
T A S
O DD A YSTEM
1. Click Add to open the RTE Wizard.
2. Select the System Event tab.
3. Select a type of event from the System Event drop-down list.
additional selections are made available in the second drop-down list located underneath (i.e. Input
Change > Input 1, Slot 1). See
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03/2014)
F
IGURE
NOTES 1)
Example.
F 4-17 RTE L
IGURE
E
VENT
Figure 4-18 Add System
F 4-18 A
IGURE
NOTE:
4-16 T B
EST UTTONS
The added event appears in the RTE Listing window.
2)
To activate or deactivate one or more RTEs listed in the
W E
ISTING INDOW XAMPLE
NOTE:
Event.
S E
DD YSTEM VENT
Section 4: Web User Interface
If the test passed or failed, a green or
Figure 4-16 Test Buttons.
Depending on the selection made,
4-11