Christie J Series User Manual page 169

Channel Group
13 Input
14 Input
15 Image
Lamps/
16
Power
17 Reserved
18 Reserved
ZAP VIP Projector Yoke Personality
Channel Group
1 Video
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
Name Description
Projector Channel Selection
0 to 9 Projector Channel 1
10 to 19 Projector Channel 2
Channel 20 to 29 Projector Channel 3
....
180 to 189 Projector Channel 19
190 to 199 Projector Channel 20
Input Selection
0 to 9 Slot 1, Input 1
10 to 19 Slot 1, Input 2
....
50 to 59 Slot 1, Input 6
60 to 69 Slot 2, Input 1
....
Input
110 to 119 Slot 2, Input 6
120 to 129 Slot 3, Input 1
....
170 to 179 Slot 3, Input 6
180 to 189 Slot 4, Input 1
....
230 to 239 Slot 4, Input 6
0-85 Unfreeze image
Image Freeze
172-255 Freeze image
0-85 Power Off (Switch lamps off, cool
lamps down and go to Standby mode)
Power
172-255 Power On (Switch lamps on,
warm up mode)
Reserved for future expansion
Reserved for future expansion
Name Description
0-85 Black screen (Picture mute ON)
172-255 Live video (Picture mute OFF)
Fade to/from
Black
0 Shutter Closed
1-255 Shutter Open
Appendix C: DMX / ArtNet
Default
Notes
Value
255
Will not change input on
255
default.
0
A 5 second timer will be used
before executing a power state
change. If the slider moves out
of the On/Off range within the
128
5 seconds, the timer will be
cancelled.
Will not change power state
on default.
No Reset
No Reset
Default
Notes
Value
If a value of 0 is set, the shut-
ter will be closed. Any non-
zero values will open the shut-
ter. If you wish to manually
255
control the fade to black time,
the brightness channel can be
used to achieve the same
effect.
C-7