Christie J Series User Manual page 78

J series 1000w & 1200w projector
Hide thumbs Also See for J Series:
Table of Contents

Advertisement

Section 3: Operation
1.
Auto Input Level
2.
Red (Pr) Blacklevel
3.
Red (Pr) Input Drive
4.
Green (Y) Blacklevel
5.
Green (Y) Input Drive
6.
Blue (Pb) Blacklevel
7.
Blue (Pb) Input Drive
8.
Auto Color Enable
9.
Clamp Location
10.
Input Peak Detector
11.
Color Enable
• COLOR ENABLE
Select which color or colors you want to see in the display, useful while working with color temperature white
levels or input levels.
used.
2)
If color temperature is set up based on the internal test patterns, you can set up input levels for a given
source so that it matches the color temperature of the internal test patterns.
ADVANCED IMAGE SETTINGS - Submenu
Use the Advanced Image Settings submenu to make the adjustments necessary for lesser-used but more
specialized applications on your projector.
GAMMA SETTINGS - Submenu
The system offers two types of gamma correction. Gamma correction can be applied to a specific source to
correct for luma encoding. This is a channel setting and reapplied every time the same signal is detected. This
is the 'Gamma' control. On the other hand the system also provides a global Gamma Correction control. The
global control offers an offset applied to all channels. This offset is used to compensate for changes in ambient
conditions such as ambient light in the room and projected material.
• GAMMA CORRECTION
Applies a global offset to all gamma settings for each channel. It affects the shape of the curve by performing a
linear transform toward a gamma curve of 1.0 while the control is increasing and likewise a linear transform
toward a gamma of 3.0 as the control is decreasing. The control should only be adjusted to compensate for
ambient conditions. To correct a particular source only, use the Gamma control.
• GAMMA
Select the base gamma table for a given source. Select from one of the standard tables, a custom gamma
function, or select an arbitrary gamma table that has been downloaded to the projector.
utility is needed to do this.
3-28
Input Levels
256
256
256
256
256
256
Back Porch
White
F
3-28 A
IGURE
DJUSTING
(RED EXAMPLE SHOWN)
NOTES: 1)
Input levels apply for the current source only, but for any color temperature
I
L
U
NPUT
EVELS
SING THE
P
D
EAK
ETECTOR
NOTE:
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
A separate PC

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds+8k-jHd7k-jDs+10k-jHd9k-j

Table of Contents