Christie J Series User Manual page 38

Section 2: Installation and Setup
Ethernet Communications
Refer to Section 3 Operation
Ethernet, and the Serial Command document provided in the Dealer Section of the Christie Website, PN 020-
100224-XX.
Connecting Multiple Projectors
RS-232 NETWORK:
1. Connect the controlling source to the RS-232 IN connector of the first projector in the network.
2. Using another serial communication cable, connect one end to the RS-232 OUT connector and the other
end to the RS-232 IN connector of the next projector.
3. Continue this pattern of connection with all projectors in the network.
network will have a connection to the RS-232 IN connector only. See
2-22
F 2-20 C
IGURE
for further information about setting up and using a projector connected via
To connect multiple projectors in a network with serial communication:
RS-422
ONNECTING
F 2-21
IGURE
NOTE: The last projector in the
Figure 2-21 .
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)