Christie J Series User Manual page 70

Section 3: Operation
FULL SIZE - uses all pixels for displaying the image,
regardless of source or original aspect ratio. Incoming
source material having a different aspect ratio than the
projector will be stretched for display.
FULL WIDTH - fills the projector display from left-to-right
without changing the original aspect ratio of the image.
Depending on the source, data at the top and bottom may be
discarded (cropped), or the display may have black borders
at the top and bottom (called "letterboxed").
FULL HEIGHT - fills the display from top-to-bottom. Depending on the source, this may create borders.
ANAMORPHIC - displays an anamorphic image in its native 16:9 aspect ratio.
The image will fill the screen from side-to-side and be centered between black
bars at top and bottom.
SIZE
Controls both the image width and height in tandem, maintaining the current
aspect ratio of the displayed signal data.
VERTICAL STRETCH
Adjusts the height of the image while keeping the width constant. Use "Vertical Stretch" to change the aspect
ratio of the display.
PIXEL TRACK (analog input signals only)
Steady flickering or several soft vertical stripes or bands across the entire image indicates poor pixel tracking.
Proper pixel tracking ensures that the image quality is consistent across the screen, the aspect ratio is
maintained, and that the pixel phase can be optimized (described below). Tracking determines the frequency of
3-20
F 3-23 F H
IGURE ULL EIGHT
F 3-21 F S
IGURE ULL IZE
F 3-22 F W
IGURE ULL IDTH
F 3-24 A
IGURE
J Series 1000W and 1200W User Manual
020-100706-02 Rev. 1 (03-2014)
NAMORPHIC