Ricoh FT8880 Service Manual page 93

RDH
13.9 EXIT ROLLER SOLENOID ADJUSTMENT
1. Remove the front cover.
2. Loosen the 2 screws [A].
3. Maintain the 0.5 mm gap (as shown) and adjust the solenoid bracket
position so that the arm [B] is parallel to the bracket [C] when the plunger
[D] is pushed in the solenoid. Then, re-tighten the 2 screws.
[A]
0.5 mm
5-10
[B]
[D]
5 June 1992
[C]