Ricoh FT8880 Service Manual page 24

5 June 1992 RDH
16.4 SINGLE FEED MODE
16.4.1 Registration
[D]
[E]
[B]
[A]
[C]
[D]
When the single feed set sensor [A] detects the leading edge of the original
the feed motor rotates and the right turn roller [B] transports the original. At
the same time the single feed gate solenoid [C] is energized and the single
feed gate [D] is lowered. The feed motor and single feed gate solenoid are
energized until the registration sensor [E] detects the leading edge of the
original. The original is transported until hits the single feed gate, which
corrects the original feed skew. At the same time the right turn roller stops
rotating.
2-13