Ricoh FT8880 Service Manual page 44

5 June 1992
3.1 A3/11" x 17" COUNTER INSTALLATION
[A]
[C]
CAUTION: Unplug the copier power cord before starting the following
procedure.
1. Open the right front door and remove the right inner cover [A] (3 screws).
2. Install the A3/11" x 17" counter [B] (1 connector).
3. Cut the cap [C] of the right inner cover by the pliers.
4. Reassemble.
5. Plug in the copier power cord and turn on the main switch.
6. Set the A3/11" x 17" counter mode on by using SP mode.
7. Check the counter operation by making an A3/11" x 17" copy.
INSTALLATION PROCEDURE
3-13
[B]