Ricoh FT8880 Service Manual page 41

INSTALLATION PROCEDURE
[B]
[H]
22. Insert the leveling shoes [A] under the feet, and level the machine by
securing down the feet.
23. Insert the sponge cushion [B].
24. Remove the strips of filament tape [C] of LCT.
25. Remove the LCT lower rear cover [D] (2 screws), fixing plate [E] (3
screws) and reinstall the LCT lower rear cover. Remove the LCT upper
rear cover [F] (4 screws), fixing screw [G], fixing plate [H] (2 screws), and
reinstall the LCT upper rear cover.
[A]
[E]
3-10
[C]
[G]
5 June 1992
[C]
[F]
[D]