INSTALLATION PROCEDURE
3. INSTALLATION PROCEDURE
[A]
[C]
[F]
CAUTION: While the leveling shoes are not installed, do not
completely pull out many units simultaneously. Otherwise,
the machine could topple.
NOTE: Keep the shipping retainers after installing the machine. They will be
reused if in the future the machine is transported to another location.
Proper reinstallation of the shipping retainers is required in order to
avoid any transport damage.
1. Remove the strips of the filament tape [A] and remove the cushion [B] of
the exposure glass.
2. Open the left and right front doors [C, D] and remove the strips of filament
tape [E]. Remove the styrofoam block [F] under the transport unit.
[D]
[A]
[E]
3-4
5 June 1992
[B]