Ricoh FT8880 Service Manual page 91

RDH
[E]
[G]
[F]
[E]
13.7.2 Single Feed Set Sensor Replacement
1. Remove the scale [A] (4 screws and 1 connector).
2. Replace the single feed set sensor [B] (1 screw).
13.7.3 Registration Sensor Replacement
1. Remove the right stay supporter [C] and right turn guide [D] (4 screws
each).
2. Remove the 5 screws [E] from the registration right guide [F] and release
the belt unit [G]. Then, slide the registration right guide to the left.
3. Replace the registration sensor [H] (1 screw and 1 connector).
[D]
[H]
5-8
5 June 1992
[C]
[B]
[A]