Ricoh FT8880 Service Manual page 197

6 March 1992
5.3 SIDE BAR ADJUSTMENT
[A]
[D]
1. Remove the upper cover [A] and the rear cover [B].
2. Manually move the side bar [C] towards the front side of the bin side bar
slot [D], by turning the side bar motor manually.
3. Confirm that the side bar is parallel and contacts both the 1st and 20th
bin side bar slots front side.
4. If improper contact is observed between the 1st and 20th bin, remove the
timing belt clamp [E] and reposition the side bar position.
REPLACEMENT AND ADJUSTMENT
[C]
39
[B]
[E]