Ricoh FT8880 Service Manual page 25

RDH 5 June 1992
16.4.2 Feed
[B]
[C]
[D]
[A]
[G]
[F]
[E]
When the start key is pressed, the right turn roller [A] and transport belt [B]
rotate. The original is delivered onto the exposure glass. After the scanner
scans the original, the transport belt start to rotate to deliver it. At the same
time the inverter entrance [C] and inverter middle [D] rollers rotate and the
single feed exit solenoid [E] is energized. The single feed exit gate [F] lifts up,
exiting the original to the left top cover [G].
16.4.3 Exit Gate
In single feed mode and CFF mode, the single feed exit solenoid is energized
while the belt drive motor is driving the transport belt, and is de-energized
when the transport belt stops rotating. This solenoid on off operation is
performed to keep the solenoid reliable.
2-14