Ricoh FT8880 Service Manual page 88

5 June 1992
13.5 RDH UNIT REMOVAL
[B]
CAUTION: Take care not to injure yourself by dropping the RDH unit
during this procedure.
1. Remove the copier left rear and right rear covers.
2. Remove the upper rear cover [A] (3 screws) and rear cover [B] (1 screw)
of single feed table.
3. Remove the RDH unit stoppers [C] (3 screws each).
4. Remove the screw [D] connecting the ground wire.
5. Remove the RDH unit [E] (8 screws and 4 connectors [F]).
[E]
[F]
5-5
RDH
[D]
[F]
[C]
[A]