Ricoh FT8880 Service Manual page 152

5 June 1992
5.7 SHIFT TRAY POSITIONING ROLLER REPLACEMENT
[D]
[B]
1. Raise the stack height sensor actuator [A] and hold it until the shift tray
automatically lowers.
2. Turn off the main switch before the shift tray returns to its home position.
NOTE: If the machine is in a condition that does not allow the shift tray to
be lowered electrically, then remove the shift tray [B].
3. Remove the 2 E-rings [C] and replace the reverse roller [D].
[C]
REPLACEMENT AND ADJUSTMENT
33
[A]