Ricoh FT8880 Service Manual page 195

6 March 1992
5. REPLACEMENT AND ADJUSTMENT
5.1 BIN/JAM SENSOR ADJUSTMENT
NOTE: This adjustment should be performed when the main board or the
bin/jam sensor is replaced.
1. Remove the rear cover.
2. Confirm that there is no paper on the bins.
3. Turn on the DIP SW100-4 on the main board.
4. Turn the VR100 and VR101 so that the LED100 and LED101 are at the
ON/OFF threshold (just turns off).
5. Turn off the DIP SW100-4.
REPLACEMENT AND ADJUSTMENT
37