Ricoh FT8880 Service Manual page 126

5 June 1992 OVERALL MACHINE INFORMATION
1.5 BASIC OPERATION
[B]
[A]
[F]
[D]
[C]
[E]
After the copy is completed, the paper is directed to the finisher. If the
sort/stack mode is selected, the junction gate [A] directs the paper upwards
to transport it to the shift tray [B]. In these modes, the shift tray is shifted side
to side to stagger and separate sets of copies. The amount of shift is
approximately 30 mm.
When the staple mode is selected, the junction gate directs the paper below
to transport the paper to the jogger unit [C]. Each time a copy is delivered to
the jogger unit, the positioning roller [D], the alignment brush roller [E], and
the jogger fences [F] squere the stack of copies. After the final copy of the set
is squared, the set is stapled, and then delivered to the shift tray.
7