Ricoh FT8880 Service Manual page 189

6 March 1992
[C]
20. Join the 2nd sorter to the relay unit and set the timing belt [A]. Then hook
the spring [B] of the tension pulley bracket.
21. Remove the front cover [C] of the horizontal transport unit (2 screws).
22. Install the harness cover bracket [D] (1 screw, M4 x 6) packed with the
2nd sorter to the relay unit.
23. Connect three of the five connectors [E] from the 2nd sorter.
24. Fix the ground line [F] from the 2nd sorter to the relay unit (M4 x 8 with a
star washer).
25. Pass the harness through the cutout of the bracket [D] and install the
bushing [G] packed with the 2nd sorter.
26. Install the front cover [C] of the relay unit (2 screws).
27. Install the front harness cover [H] and the front cover [I] of the horizontal
transport unit.
[H]
[A]
[E]
[I]
[C]
31
INSTALLATION PROCEDURE
[B]
[D]
[F]
[G]