Ricoh FT8880 Service Manual page 18

5 June 1992 RDH
16.1.5 2 Sided Original 1 Sided Copy Mode
[A]
[D]
[B]
[C]
[E]
Inversion original cycle is used for this mode. All the originals [A] are fed
starting rom the bottom original sheet. Firstly, the front side of all the originals
are copied and the copied paper [B] is stacked in the duplex tray. The
originals [C] are inverted and return to the original table. The original feed is
then repeated. This time, the bottom copy sheet is fed from the duplex tray
and exited from the copier without copying [C]. The reverse side of the
bottom original sheet [D] is then copied to paper [E], which is fed from the
paper tray, and the copy is exited from the copier [E]. This copy sequence
exiting from the duplex tray followed by the paper tray is alternately repeated.
2-7