Ricoh FT8880 Service Manual page 58

SERVICE PROGRAM MODE
8
SP Test Mode -- 4 (PAGE 2)
Test Procedure
SET
Touch on the display and press "START" key top to start.
Touch or press "CLEAR/STOP" key top to stop.
RESET
Item
Drum Conditioning
Mode
Free Run Mode
(Lamp ON)
Free Run Mode
(Lamp OFF)
Scanner Free Run
Mode
RDH Free Run
Mode
CFF Free Run
Mode
Fusing Pressure
Check Mode
Finisher Motor
Test Mode
Finisher Free Run
Mode
Function
Turns on the main motor, the
development drive motor, corona
power packs, and the erase lamp.
Operates the copier without
feeding paper.
Operates the copier without
feeding paper or turning on the
exposure lamp.
Runs the scanner unit.
Feeds originals automatically
without main copier operation.
Feeds CFFs automatically without
main copier operation.
During copy cycle, a copy stops in
the fusing unit for 15 seconds.
Operates the finisher drive motors
in sequence.
Operates the finisher without
feeding paper.
Place sheets of white paper (A3
or 11" x 17") on the exposure
glass.
Do not operate the machine in this
mode for a long time.
Before testing, set originals in the
original table. The test is done
when all originals are fed out.
Before testing, set CFFs in the
original table. The test is finished
when all CFFs are fed out.
Select a paper tray before
accessing the SP mode and open
document feeder to make sky
shot.
The transport drive, stack feed,
and exit drive motor speeds are
adjusted automatically.
4-12
5 June 1992
Remarks