Ricoh FT8880 Service Manual page 115

INSTALLATION PROCEDURE
5. INSTALLATION PROCEDURE
[D]
[C]
CAUTION: Before installing the Menu Reader, make sure that the
copier is unplugged.
1. Remove the left upper cover [A] (2 screws), left top cover [B] (7 screws),
left rear cover [C] (2 screws), and right rear cover [D] (2 screws).
2. Peel the backing off the strips of double-sided adhesive tape [E] and stick
the menu reader on the DF [F] as shown.
[F]
8
6 March 1992
[B]
[A]
[E]