Ricoh FT8880 Service Manual page 155

REPLACEMENT AND ADJUSTMENT
[C]
[B]
[A]
Shift Tray Half Turn Sensor
1. Remove the rear cover.
2. Remove the shift motor bracket [A] (3 screws).
3. Remove the sensor bracket [B] (1 screw) and replace the shift tray half
turn sensor [C].
Jogger Unit Paper Sensor
1. Open the front cover and slide out the staple unit [D].
2. Remove the 2 screws [E] fixing the bracket [F].
3. Slightly pull out the bracket in the direction shown and remove the jogger
unit paper sensor [G] (1 screw).
[D]
36
5 June 1992
[F]
[E]
[G]